Name: Full Rack Colocation in Interxion MAD1 Madrid
Price: 1762.53 USD
Availability: InStock

Interxion MAD1 is the most interconnected datacenter in Spain with over 134 service providers. It hosts DE-CIX Madrid and ESPANIX, each one with over 110 participants.

Location

Power

Power Lines

	SETUP	MONTHLY
2 x 16A / 230V redundant power lines are installed in Digital Realty FRA3, FRA8, and Interxion MAD1. - Each power line is sourced from a different UPS and is equipped with its own circuit breaker that activates when the line's 16A rating is reached. - The power lines are positioned in close proximity to the rack cabinet to facilitate connection of PDUs using dedicated cables. Ideally, PDUs should match the Voltage and Amperage ratings of the lines. If not, they must come with factory-installed circuit breakers. - Each power line features a single IEC309 16A 2P+E receptacle, enabling connection of one PDU per line. - For optimal redundancy, equipment in the rack cabinet should have dual power sources, each linked to a separate power line. - Equipment with a single power source should be evenly distributed across the power lines	-	-
2 x 32A / 230V redundant power lines – Each line is sourced from a different UPS and has its own circuit breaker that triggers when the line 32A rating is reached. – Power lines are installed close enough to rack cabinet to allow PDUs to be connected with their own cable. The PDUs, ideally, should have the same Voltage and Amperage rating as the lines. If they don’t, they must be equipped with circuit breakers from the factory. – Each power line has a single IEC 60309 (formerly known as IEC309) 32A 2P+E receptacle that allows to connect one PDU per line. – Equipment installed in rack cabinet ideally would have two power sources, each one connected to a different power line to achieve power redundancy. – Equipment with one power source should be connected balanced between power lines and they will not be protected against one line power failures.	-	+$85.02

Power Consumption

	SETUP	MONTHLY
2.5 kW maximum instantaneous power consumption from all power lines in Interxion MAD1 Madrid – It is the rough equivalent of 2.6 kVA or 11 A @ 230V or 1800 kWh/month or 7140 Watts of primary server sources used at 35% – Even if each power line (or all power lines combined) can support a higher power draw (consumption) the datacenter does not allow this because of: (a) UPS provisioned capacity, (b) loss of redundancy in case load moves to a single line due to one line power failure (c) cooling provisioned capacity for this rack cabinet and (d) electricity cost. – Going above the power draw threshold can put you at risk of power disconnection. – The most efficient power schema is to draw almost the entire power allowed under normal usage condition and configure the equipment to start randomly at power-up. This will avoid power-on spikes that might trigger the circuit breakers.	-	-

Colocation Support

SLA for Colocation

	SETUP	MONTHLY
Standard SLA for a Colocation service. 'Remote hands' This SLA assumes the equipment is installed by customer and works well, no hardware changes are expected and only occasional simple emergency requests might be required. Standard SLA includes unlimited number of requests for power cycles, visual inspection of equipment, access to a shared remote KVM along with very simple tasks for hot-plug components or cables like 'plug / unplug' or 'take .. from .. and replace .. '. The SLA does not cover installation/removal/replacement of non-hot plug components or any hardware or software troubleshooting. Requests under this SLA are executed first come, first served by 24/7 on-site datacenter personnel under the assumption they are 'urgent'. Under normal operation conditions such requests are executed in less than 30 minutes, but no guarantee is provided. (On-site support not included in Standard SLA is charged: $54.50/Hour)	-	-
Expert SLA for a Colocation service. 'Remote Hands and Expert Installation' This SLA covers two batches of equipment physical installation in rack cabinet at a agreed date and later, packaging and shipping. Cost of packaging material, shipping and import/export duties are charged separately. It also covers expert cabling of Internet, private, management and out-of-band networks and the cost of all UTP cables and patches. It doesn't cover fiber and twinaxl patches that must be purchased separately. The Expert SLA includes software configuration of ILO / DRAC / IMM management ports and troubleshooting to power up the equipment. The post-install maintenance includes unlimited number of requests for power cycles, visual inspection of equipment, access to a shared remote KVM along with very simple tasks for hot-plug components or cables like 'plug / unplug' or 'take .. from .. and replace .. '. The SLA does not cover installation/removal/replacement of non-hot plug components or any troubleshooting outside the two initial installation/removal batches. Maintenance requests under this SLA are prioritized over Standard SLA and executed first come, first served by 24/7 on-site datacenter personnel under the assumption they are 'urgent'. Under normal operation conditions such requests are executed in less than 30 minutes, but no guarantee is provided. (On-site support not included in Expert SLA is charged: $54.50/Hour)	+$654.00	-

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

	SETUP	MONTHLY
Instant activation
Do not install any Fiber Patch Panel – Cross Connects will not be possible to be originated or terminated in this rack cabinet and will be left out with any kind of connectivity. – Still, this rack cabinet can be connected with a small number of fiber or other types of cables to an adjacent rack cabinet you previously rented. This solution works only if both rack cabinets are next to each other (have a common side).	-	-$284.49
Delivery in 7 days or less
Fiber Panel (ODF) precabling with 6 single mode fiber pairs (SC) in Interxion	-	-
Fiber Panel (ODF) precabling with 12 single mode fiber pairs (SC) in Interxion	-	+$189.66
Fiber Panel (ODF) precabling with 24 single mode fiber pairs (SC) in Interxion	-	+$400.03

Full Rack Colocation in Interxion MAD1 Madrid

Product Specifications

Location

Power

Power Lines

Power Consumption

Colocation Support

SLA for Colocation

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

Choose from available quotes linked to this account

Step 1. Page format

Step 2. Offer content

Full Rack Colocation in Interxion MAD1 Madrid

Product Specifications

Location

Power

Power Lines

Power Consumption

Colocation Support

SLA for Colocation

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

Add to Quote

Choose from available quotes linked to this account

Export This Offer

Step 1. Page format

Step 2. Offer content